Home       E-Mail       Imprint       DE  UK

Food and Packaging

  • integrated power stages up to 70 V, 5A; or more powerful stages via external interface
  • 2 limit switches and 1 reference switch per axis already included (electrically isolated)
  • optional encoder (ENDAT / SSI) and temperature evaluation (Pt / K-element) per axis via sub modules 
  • Host Interface

    • Selectable: USB, RS 485, RS 232, RS 422, CAN, Ethernet, ProfiBus/ProfiNet, Bluetooth
    Modules
    • 4 Axes High End Indexer (interpolation)
    • Power stages
    • Indexer Interface
    • Digital I/O
    • Analogue I/O 
    • Integrated Touch Panel
    • Customised

    Housing

    • Bench, rail, sub rack or wall mounting
    • Holding torques from 0.45 to 17 Nm
    • Diameters ZSH: 57 to 107mm
    • NEMA compatible 
    • Optional: gear, motor brake, encoder, 2nd shaft, coupling, etc.
    • Holding torques from 3.8 mNm to 700 mNm
    • Standard number of steps: 200. special step width depending on the motor sizes: 8, 24, 56, 72, 500
    • Diameters: 19 to 56 mm
    • Optional: gears, motor brake, encoder, 2nd shaft, heat sink coupling, etc.
    • Stepper motor controller with integrated power stage for SIMATIC ET 200S®
    • For 2 phase stepper motors
    • 5 APEAK at 24 to 48 VDC
    • Up to 1/512 microsteps
    • Online controller parameterization and diagnostics
    • STEP 7® programming
    • High-performance power stage, compatible with standard power stages on the market 
      (e. g. DSR 92-70)
    • Phase currents up to 9 APEAK / 70 V
    • Operation parameter setting: manual or online via ServiceBus
    • Different models available
    • 15 to 30 mm in diameter
    • Bore for mounting the motor shaft: 3 to 12 mm
    • Maximum permissible torque: 0.71 to 4 Nm
    • Absolutely backlash-free
    • Stainless steel stepper motors for the toughest environmental conditions
    • Temperature range from -40 to +150 °C, rel. humidity up to 95%
    • Protection class IP 67, replacable radial sealing
    • Holding torques from 150 mNm to 5.5 Nm
    • Diameters 45 to 100 mm
    • Standard number of steps 200 (1,8°)
    • Special design on demand: suitable for food industry – radiation resistant
    • Small Servo Motors with Continuous Stall Torque from 0.03 to 0.9 Nm.
    • Control with a PC-based Motion Controller for Servo Motors and Stepper Motors.

    Looking for products for a specific area of application? With the quick-navigation to the application fields, you will find recommended solutions for your area right away.

    All fields of application at a glance
    Mechanical Engineering      Positioning and Handling      Food and Packaging      Research      Medical Engineering      Nuclear      Climatic      Cryo      Cleanroom      Aeronautical Engineering      Space Technology      Vacuum      Particle Accelerator      Arduino      Plant Automation      Paper and Print Industry     
    Phytron GmbH | Fon: +49-8142-503-0 | Fax: +49-8142-503-190 | E-Mail: info@phytron.de